SnellConcrete & Construction +1 (405) 326-6117Free Estimate
ServicesRemodelingHow It WorksRecent WorkService AreasFAQGet My Free Estimate
Call NowFree Estimate
Boone County · Serving Ashland

Concrete Contractor in Ashland, MO

Ashland sits between Columbia and Jefferson City, about 20 miles from Fulton. It's had steady residential growth, which means both new-build flatwork and replacement work on older properties.

Concrete work we do in Ashland

Driveways, patios, sidewalks, foundations, garage and shop slabs, demolition, repair, and foundation crack injection — the same scope in Ashland as anywhere else in our area.

What's different about pouring here

New construction in and around Ashland needs footings, garage slabs, and driveway approaches coordinated with the builder's schedule. Existing homes are more often patio additions and driveway replacement.

Concrete costs in the Ashland area

Local cost surveys for this market put new driveway concrete at roughly $6–$11 per square foot, which lands a typical 12' x 30' driveway around $2,200–$4,000 for a typical 12' x 30' driveway. Ready-mix runs about $138–$166 per cubic yard depending on the PSI called for, and resurfacing existing concrete generally runs $3–$10 per square foot.

Those are market ranges, not our quote. What actually moves your number is square footage, slab thickness, whether an old slab has to come out, how much base work the site needs, and how easily a truck can reach the pour. You get a real figure after a free on-site walkthrough.

Freeze-thaw and drainage in mid-Missouri

Concrete in this part of the state cycles above and below freezing repeatedly through the winter. Water that gets into the surface expands when it freezes, and that's what causes the flaking and scaling you see on older drives — usually made worse by de-icing salt. It's why base prep, correct slope, and joint placement matter more here than the mix does, and why a slab that sheds water outlasts one that holds it.

Other areas we serve

Common Questions

Answers before you call.

Do you charge extra to come out to Ashland?

No. Ashland is about 20 miles from our base in Fulton and it's part of our normal service area — estimates there are free, same as anywhere else we work.

What does a concrete driveway cost in Ashland?

Cost surveys for the mid-Missouri market put new driveway concrete around $6–$11 per square foot, or roughly $2,200–$4,000 for a typical 12' x 30' driveway. Removing an old driveway typically adds $1.30–$2.00 per square foot. Those are market ranges to set expectations — your actual number depends on size, thickness, access, and base condition, and you get it after a free walkthrough.

How deep do footings have to go in Boone County?

Below the local frost line. Missouri doesn't set one statewide depth, and jurisdictions in this part of the state generally fall in the 24–36 inch range. The number that governs your job is whatever your local building department enforces, and we confirm it before digging rather than assuming.

Do you work with builders and general contractors?

Yes. Footings, slabs, and flatwork for builders are a regular part of the schedule alongside homeowner projects.

Book Online

Get your free estimate.

Answer four quick questions and we'll get back to you to set up a walkthrough. No cost, no obligation.

Step 1 of 4 — The project

Takes about 30 seconds. Prefer to talk? Call +1 (405) 326-6117