Concrete Contractor in Oklahoma City, OK
Oklahoma City is roughly twenty miles north of Norman and it's the busiest part of our Oklahoma service area — a mix of older neighborhoods needing driveway replacement and new construction needing flatwork and footings.
Concrete work we do in Oklahoma City
Driveways, patios, sidewalks, foundations, garage and shop slabs, demolition, repair, and foundation crack injection — the same scope in Oklahoma City as anywhere else in our area.
What's different about pouring here
OKC jobs split fairly evenly between homeowners replacing a failed driveway and builders needing slabs and footings on a schedule. Both get the same base prep; what changes is sequencing around the other trades.
Concrete costs in the Oklahoma City area
Local cost surveys for this market put new driveway concrete at roughly $6–$11 per square foot, which lands a typical 12' x 30' driveway around $2,200–$4,000 for a typical 12' x 30' driveway. Ready-mix runs about $138–$166 per cubic yard depending on the PSI called for, and resurfacing existing concrete generally runs $3–$10 per square foot.
Those are market ranges, not our quote. What actually moves your number is square footage, slab thickness, whether an old slab has to come out, how much base work the site needs, and how easily a truck can reach the pour. You get a real figure after a free on-site walkthrough.
Freeze-thaw and drainage in mid-Missouri
Concrete in this part of the state cycles above and below freezing repeatedly through the winter. Water that gets into the surface expands when it freezes, and that's what causes the flaking and scaling you see on older drives — usually made worse by de-icing salt. It's why base prep, correct slope, and joint placement matter more here than the mix does, and why a slab that sheds water outlasts one that holds it.
Other areas we serve
Answers before you call.
Do you charge extra to come out to Oklahoma City?
No. Oklahoma City is about 20 miles from our shop in Norman and it's part of our normal service area — estimates there are free, same as anywhere else we work.
What does a concrete driveway cost in Oklahoma City?
Cost surveys for the Norman and Oklahoma City market put new driveway concrete around $5–$11 per square foot, or roughly $2,900–$5,300 for a typical two-car driveway. Removing an old driveway typically adds $1.10–$1.80 per square foot. Those are market ranges to set expectations — your actual number depends on size, thickness, access, and base condition, and you get it after a free walkthrough.
How deep do footings have to go in Oklahoma County?
Below the local frost line. Oklahoma sets it locally rather than statewide — Norman and Oklahoma City are commonly cited around 18 inches, over a code floor of 12. The number that governs your job is whatever your city or county building department enforces, and we confirm it before digging rather than assuming.
Do you work with builders and general contractors?
Yes. Footings, slabs, and flatwork for builders are a regular part of the schedule alongside homeowner projects.
Get your free estimate.
Answer four quick questions and we'll get back to you to set up a walkthrough. No cost, no obligation.